Office lighting meets customer needs for decoration and functionality

Good office lighting means more than just lighting. It should be competent for a variety of needs. We provide a wide range of lighting concepts for office lighting design, from hanging to recessed and ceiling mounted to meet customers' needs for decoration and function to a large extent.

    Line lamps have a very soft way of emitting light. Currently, the side light emitting method is commonly used. The light emitted from the surface of the lamp body is very uniform, so that the light emitted is not dazzling at all. Used in various fields, it can effectively eliminate glare.

        For direct lighting line lamps of office lighting manufacturers, the HT80-M diffuser plate is used to atomize and diffuse the LED electric light source. The principle is that there is a partial overlap between the circular diffused light spot and the diffused light spot formed by each LED on the diffuser plate. From the front of the lamp, the effect of uniform atomization is achieved. To achieve this effect, we need to consider three factors:

1. What kind of LED is used, the spot formed by the different LEDs on the diffuser is not the same, and the LED with the largest light emitting angle is selected as much as possible.

 2. The distance between LED and LED. In theory, the smaller the distance, the better, because the smaller the distance, the smaller the distance between the diffuser and the LED. However, the small distance between the LED and the LED also brings a problem. The power is too large, so it is very important to choose the proper spacing and determine the power of the whole lamp. In addition, the arrangement of LEDs is also very important. Commonly, there are square, rectangular, and equilateral triangular arrangements. The principle is that the overlap between the diffused light spots and diffused light spots formed by each LED on the diffuser plate is small.

  Line light is a very thin LED, environmentally friendly, energy saving and low carbon lighting. It uses high technology of LCD backlight light source. It is a typical environmentally friendly and energy saving LED light, which has been completely replaced now. All the lighting lamps in the past have been widely used in indoor lighting of factories, public places, office buildings, etc. because of their many advantages.