The purpose of the educational lighting setup is to provide a comfortable and scientific lighting environment for the school. How to make school lighting design a good environment for science, so that primary and secondary school students can better receive education in modern school buildings. It is the constant pursuit of all architectural designers that the school focuses on day education with natural lighting
As practitioners in the lighting and lighting design industry, we discuss from the perspective of lighting and lighting design: how to make the lighting design of school classrooms more reasonable?
1, the control requirements of educational lighting fixtures should be based on the control of the light column and the side window parallel, so that in the case of sufficient sunlight during the day, you can open the side window far away from the window, so that the overall lighting brightness of the classroom can be uniform. And can achieve the purpose of saving electricity.
2. Due to the continuous popularization of modern multimedia teaching equipment, many classrooms have installed positive projection projectors, replacing the cumbersome and space-occupying rear projection TV in the past, and putting forward new requirements for the control mode of positive projection. When designing the control method of lamps, the following issues should be considered:
One. The projection screen usually occupies half of the blackboard area. When the projector is working properly, in order to obtain sufficient screen brightness, it is necessary to turn off the fluorescent lamp near the screen in the front row.
The Bay. If the control mode of the lamp is still parallel to the side window according to the controlled lamp post, the column direction lamp near the screen must be turned off, which will directly reduce the illuminance of the middle and back desk, seriously affecting the efficiency of students' lectures. Therefore, controlling the front row fluorescent lamp separately is a way to solve the above problems.
. Similarly, the control of the blackboard light should also be separated. The idea is to keep the screen bright while the teacher can still teach on the other side of the board.
3. Set the height of the lamp reasonably. Since the projector is mounted with a boom, if the lamp and the projector stand are not properly positioned, the lamp stand will block the screen and form a shadow. Therefore, in the design phase, the position between the two must be carefully considered. Relationship, so as not to bring unnecessary trouble to the follow-up project.
In view of the difference between intelligent lighting and ordinary lighting fixtures, first of all, lighting can automatically turn the light on and off. The intelligent lighting system of the classroom uses a timed setting to automatically turn on the lighting fixtures to ensure the basic lighting needs of the classroom.
Second, it is equipped with smart light sensors. When the classroom lighting is detected that does not meet the national standard, the lights are automatically turned on. Hearing this, our eyes widened, yes, if it is cloudy or raining, the classroom will get very dark, and the teachers are likely to ignore the classroom lights because they are focused on teaching. With this product, you really don't have to worry about that.
It also kills bacteria automatically. It uses a timing setting. Generally, the germicidal lamp is automatically turned on for sterilization in the early morning, and automatically closed after the sterilization is completed. In addition, in order to save energy in schools, lighting is divided into three modes: energy saving, comfort and standard, and teachers can freely switch between these three modes.
The intelligent lighting system can also realize remote monitoring. Real-time view of classroom lighting and equipment operation through mobile APP. Principals and security guards can easily check the status through the app. The principal can manage the overall operation of school lighting.
Campus intelligent lighting is indeed a new generation of intelligent products. If kindergartens, schools or various training institutions are equipped with such equipment, it will certainly have a higher competitive advantage over competitors, and it can also provide a healthier learning environment for children. I really hope that more schools will use this smart lighting system soon.
EN
