How to make educational lighting design for schools?

The data shows that more than 60% of the day is spent in classrooms by Chinese students, and educational lighting design will have a decisive impact on student learning efficiency and vision. Students are instinctively close to books. For a long time, it is easy to cause myopia. So, how to make educational lighting design for schools?

1. Standard classroom design principles

When designing classroom lighting, you need to pay attention to taking visual health and comfort as the most important consideration, and also pay attention to whether it can improve learning efficiency. It has a large or small effect on alleviating visual fatigue. An important issue that we are very concerned about when choosing an educational lighting solution.

2. Classroom light installation

During the installation, a boom installation method is generally used. At the same time, the layout should be based on the longitudinal orientation of the classroom. The lighting power density of the classroom cannot be higher than 11w / ㎡. If the conditions are better, At that time, it must be lower than 9w / ㎡, and the vertical distance of the lamp from the desk is also required, and it cannot be lower than 1700mm.

3, blackboard light installation

In class, students' eyes are basically on the blackboard, so the effect of the blackboard light is very important. It is more suitable to use a hanging rod installation method. In addition, the installation direction of the lamp is most reasonable parallel to the blackboard. In education lighting, the parallel distance between blackboard lights should be kept at d = 700mm-1000mm, and the horizontal distance from blackboard should be within the range of h = 100mm-200mm, and the angle control and adjustment should be done well, so that Avoid the direct glare of the blackboard light to the teacher. These are the key points that we need to pay special attention to when designing classroom lighting.

Therefore, if you want to do school lighting planning and design for the school, you may refer to the above points to design a more high-quality solution